FCT non-slam check valves use a spring-assisted disc mechanism to close the valve immediately upon flow reversal, eliminating the slamming effect and water hammer typically seen in swing check valves. Their axial or inline design ensures low pressure drop and smooth operation across a range of fluids.
These valves are suitable for critical flow systems such as boiler feedwater lines, condensate return, cooling systems, and compressor discharge piping where quiet and reliable operation is required.
Design Standards: API 594, ASME B16.34, EN 12334
Size Range: 2” to 24” (DN50 to DN600)
Pressure Ratings: ANSI 150 to 900 / PN 10 to 160
Body Materials: Carbon Steel, Stainless Steel, Duplex, Bronze
Disc Design: Spring-loaded, axial flow or tilting disc
End Connections: Flanged, Wafer, Lug, Butt Weld
Temperature Range: -29°C to +425°C
Seat Type: Metal or Soft Seated (NBR, EPDM, PTFE)
Leakage Class: API 598 / EN 12266
Face-to-Face: Short pattern (API 594) or long pattern
Spring-assisted closure eliminates slam and water hammer
Silent operation ideal for residential, commercial, or sensitive process areas
Low cracking pressure ensures minimal flow disruption
Compact, inline design with easy installation
Suitable for horizontal or vertical mounting
Corrosion-resistant trim and body options available
Boiler feed and condensate systems
HVAC chilled and hot water loops
Industrial cooling water circuits
High-pressure steam and condensate return
Compressor discharge and gas distribution
Clean water and chemical transfer lines