FCT 3-Way Gate Valve

FCT 3-Way Gate Valve

GENER

FCT 3-Way Gate Valve – Multi-Directional Isolation for Complex Flow Systems

FCT 3-way gate valves allow control over flow between three pipeline connections, functioning in either diverting or mixing configurations. Designed with a rugged wedge gate or slab gate mechanism, these valves ensure tight shut-off and low-pressure loss, even in high-pressure, high-flow conditions.

They are widely used in manifolds, tank farms, transfer systems, and process networks where directional control is required without multiple valves.

Technical Specifications

  • Size Range: 2” to 24” (DN50 to DN600)

  • Pressure Ratings: ANSI 150 to 900 / PN 10 to PN 160

  • Design Type: T-Port or L-Port body configuration

  • Body Material: Carbon Steel, Stainless Steel, Alloy 20

  • Trim: Stainless Steel, Inconel, Hard-Faced Alloys

  • Seat Type: Metal Seated (Optional soft seal)

  • End Connections: Flanged or Butt Weld

  • Temperature Range: -20°C to +250°C

  • Operation: Manual, Gearbox, Electric or Hydraulic

  • Leakage Class: API 598 / Class IV or V

  • Design Standards: API 600, ASME B16.34

Key Features

  • One valve, three connections for simplified flow routing

  • Full bore passage for minimal flow restriction

  • Robust gate mechanism for high-pressure applications

  • Multi-directional control: mix, divert, or isolate

  • Low-maintenance and long-cycle life

  • Custom configurations available (T or L body)

Applications

  • Oil and gas manifolds

  • Tank farm pipeline switching

  • Process line mixing or bypass

  • Water and utility flow control

  • Transfer lines and dual inlet/outlet systems

  • Chemical and petrochemical plant distribution

AL FEATURES


3-Way Valve is designed for installation where uninterrupted flow control from one line to another is essential.

The 3-Way Valve permits selection of two different flow patterns from the same valve.

 

Design Feature

- Allows two different flow patterns from the same valve

- Simplifies piping layout

- Eliminates one motor operator connection

- Significant installation and maintenance cost savings

- Multipurpose flow control

 

Product Range :

Size: 6”~24”   ( DN150~DN600 )

Pressure: Class 150-2500  ( PN16~ PN420 )

Design: ASME B16.34

 Body Material: Carbon Steel , Alloy Steel , Stainless Steel 

Operated Way: Bevel Gear, Pneumatic, Electric，etc