FCT eccentric plug valves feature a plug that rotates away from the seat during opening/closing, eliminating scraping and minimizing contact—resulting in less wear, lower torque, and longer seal life.
This makes them ideal for municipal wastewater, industrial sludge, chemical slurries, and pulp & paper processing, where conventional valves may clog or erode quickly. The full port design also allows for minimal pressure loss and easy maintenance.
Design Standards: AWWA C517, MSS SP-108, API 599
Size Range: 2” to 36” (DN50 to DN900)
Pressure Ratings: ANSI 150 / PN 10 to 25
Body Materials: Ductile Iron, Cast Iron, Carbon Steel, Stainless Steel
Plug Materials: Stainless Steel, Ni-Resist, Rubber Coated
Seat Type: Resilient or Metal-to-Metal
End Connections: Flanged, Mechanical Joint, Grooved
Temperature Range: -10°C to +150°C
Operation: Manual, Gear, Electric, Pneumatic
Leakage Class: Class IV or Bubble-Tight (depending on seat)
Optional: Fusion bonded epoxy coating, actuator-ready versions
Eccentric movement reduces friction and wear
Suitable for throttling and on/off service
Excellent for dirty, viscous, or abrasive fluids
Resistant to clogging and corrosion
Compact design with full port flow
Low torque for actuator compatibility
Wastewater and sewage treatment plants
Slurry and abrasive fluid transport
Pulp and paper industry
Chemical and petrochemical waste streams
Cooling water systems with suspended solids
Food and beverage byproduct lines