FCT Three Way Globe Control Valve


FCT Three Way Globe Control Valve


Design CodeASME B16-34
Valve Size15 to 300 mm (1/2” to 12”)
RatingANSI 150 to 600 or equivalents to DIN, BS10, JIS etc 
End ConnectionFlanged, Butt weld
Body MaterialCarbon steel, Chrome-moly steel, Stainless steel, Monel, Alloy 20, Hastelloy B/C, Duplex stainless steel, Aluminium bronze
BonnetStandard up to 400°C Normalising between 250°C to 500°C Extended cold service -20°C to -100°C, Cryogenic -100 ºC to -250 ºC Bellowseal
Gland PackingPTFE Chevrons, Graphite, Low emission
Trim FormSkirt Guided, Linear, Pressure Balanced
Trim MaterialStainless steel, Duplex stainless steel, 13% Chrome steel, Monel Hastelloy B/C, Stellite
Flow CharacteristicLinear
Seat LeakageAs per ANSI / FCI 70-2-2006 Class III, IV, V and VI
Actuator FormDiaphragm, Piston or Electric
Actuator TypeDirect / Reverse Acting, Direct Acting air failure “Close” top port. Reverse Acting air failure “Opens” top port.
DiaphragmNitrile / Neoprene (nylon reinforced)
Spring Range3-15 PSIG (0.2 - 1.0 Bar) 6-30 PSIG (0.4 - 2.0 Bar)
Air Supply20-60 PSIG (1.4 - 4.0 Bar)
Air Connection1/4” or 1/2” NPT
AccessoriesValve Positioners - Pneumatic, Electro-Pneumatic, Smart
Instruments - Airset, Solenoid Valve, Volume Booster, Airlock, Limit Switches
FeaturesTop or Side Mounted hand wheel, Limit Stops Removable Blind Head, Steam Jacketing etc.